Wandelbots NOVA
Overview
Section titled “Overview”Connects to a Wandelbots NOVA cell: joint positions over the state stream, controller IOs over the IO stream.
Set up and parameters
Section titled “Set up and parameters”| Parameter | Example |
|---|---|
| Server | http://192.168.1.90 |
| Cell / motion group | cell / 1@fanuccrx10ial |
| Token, or user and password | NOVA credentials |
Joint positions arrive over the NOVA state stream (converted to degrees, also published as <interface>.axis1 …) and controller IOs over the IO stream. Addresses: axis<n>, io:<name> (Boolean, integer or float IO) and prog:run, prog:stop, prog:loop, which run the Wandelscript program template from the interface settings. A run that exceeds the program timeout (default 300 s) is stopped and reported in <interface>.prog.error. Browse lists the controller’s IOs. The token and password are not shown again after saving.
Moves and program starts on igus, RoboDK and NOVA need Allow web to PLC, react to a rising edge only and are never repeated after a reconnect.
Create or import signals
Section titled “Create or import signals”- Manually. Enter
axis<n>,io:<name>(Boolean, integer or float IO) orprog:run,prog:stop,prog:loop. - Browse. Yes. Browse lists the controller’s IOs.
- File import. No protocol-specific file import.
- From the model. When the model already has its PLC signals, Addresses → Fill from controller… in the signal-mapping section of the CONNECT panel previews matches by exact name against what Browse finds and then writes the addresses. Addresses → Import address table… takes a CSV or TSV with
name;address[;dataType[;topic]]rows. New signals take direction and type from the same-named model signal; signals that already exist keep their configured type. See Configuring interfaces.
How direction, data types and write access are decided is explained in Common concepts and Configuring interfaces.
See also
Section titled “See also”- Common concepts — text signals, direction, write access, tracking signals
- Configuring interfaces — adding signals, direction and write access
- All supported interfaces
- Troubleshooting — connection and signal problems