Keba Kemro X
Overview
Section titled “Overview”Couples Keba controllers over the variable service. Values arrive as pushes; writes go out by variable name.
Set up and parameters
Section titled “Set up and parameters”| Parameter | Example |
|---|---|
| Host | 192.168.1.100 |
| User / Password | controller credentials |
| Output / input topic | realvirtual_outputs / realvirtual_inputs |
| Connection timeout | 10 s (default) |
Addresses are fully qualified Keba variable names (PLC.app.Speed). Values arrive as pushes over the variable service; writes go out by variable name. Discovery browses the variable tree from configurable root paths and can infer the direction from name patterns. The input topic collects the variables realvirtual writes, as in realvirtual for Unity; leave it empty to create none. A login that does not answer within the connection timeout shows as an error and is retried with the normal reconnect delay.
Create or import signals
Section titled “Create or import signals”- Manually. Enter the fully qualified Keba variable name, for example
PLC.app.Speed. - Browse. Yes. Discovery browses the variable tree from configurable root paths (Browse roots) and can infer the direction from name patterns.
- File import. No protocol-specific file import. Use Addresses → Import address table… for a prepared list.
- From the model. When the model already has its PLC signals, Addresses → Fill from controller… in the signal-mapping section of the CONNECT panel previews matches by exact name against what Browse finds and then writes the addresses. Addresses → Import address table… takes a CSV or TSV with
name;address[;dataType[;topic]]rows. New signals take direction and type from the same-named model signal; signals that already exist keep their configured type. See Configuring interfaces.
How direction, data types and write access are decided is explained in Common concepts and Configuring interfaces.
See also
Section titled “See also”- Common concepts — text signals, direction, write access, tracking signals
- Configuring interfaces — adding signals, direction and write access
- All supported interfaces
- Troubleshooting — connection and signal problems